Washing Machine Not Spinning | Expert’s Troubleshooting Guide


A washing machine is a necessary home item that makes keeping clothing clean easier. However, it could be annoying and inconvenient if it abruptly stops operating. The failure of washing machines to spin is one of the most frequent complaints. Simple errors or significant mechanical breakdowns could both be at fault.

This article will explain the causes of your washing machine’s non-spinning behaviour and offer solutions. This guide will assist you in identifying the issue and putting a fix in place, regardless of whether you own or rent, so you may resume doing laundry conveniently and quickly.

Possible reasons why a Washing Machine Not Spinning:

We need to determine what might be causing your washing machine to stop spinning before we can start troubleshooting. Here are some examples of typical causes:

Why Is My Washing Machine Not Spinning
  • Broken or worn drive belt: Drive belts that are worn out or broken don’t allow the washing machine’s drum to spin. Drums that are worn out or damaged won’t turn. The machine’s condition can be determined by removing the back panel and physically examining the belt for wear indicators.
  • Motor coupling failure: A broken motor connection connects the transmission and motor. The device won’t spin if it breaks down. Starting the machine with no load and monitoring whether the engine turns but the drum cannot help you determine if the motor connection is damaged.
  • Broken or faulty lid switch: It is possible that the lid switch, which should stop the machine from turning on with the lid open, is broken or broken. If the machine is broken or broken, it won’t spin when the lid is closed. Opening the lid makes it possible to see if the switch is pressed when closed.
  • Clogged or damaged drain pump: If the drain pump is broken or blocked, water won’t drain once the washing machine cycle has been over. Anything that obstructs it from spinning or cracks will stop it in its tracks. The machine’s front panel must be removed to inspect the pump for debris or damage.
  • Malfunctioning motor control board: The motor cannot perform properly if the speed control board has a problem. The machine won’t rotate properly, if at all if it is broken. Both monitoring the voltage going to the motor and visually inspecting the board for any signs of damage can be used to check the control board.
  • Broken or faulty transmission: Transmission issues could make it harder for the engine to provide power to the drum. The machine won’t spin if it’s broken or not operating correctly. By removing the machine’s back panel and looking for wear and tear, the gearbox can be checked for damage.
  • Imbalanced load or overloaded machine: A machine may only spin if the load is well-spent and evenly distributed. The load must be evenly distributed and manageable for the machine to turn effectively.
Also, check out How Does A Washing Machine Work

How to troubleshoot and fix the problem?

We can discuss how to find and resolve the issue now that you know why your washing machine might not be spinning. What to do is as follows:

  • Unplug the machine: Before starting any troubleshooting, disconnect the gadget from its power supply.
  • Check the drive belt: Remove the back cover of the machine and check the drive belt for damage. You should replace it if you discover it is harmed or worn out. Any major appliance retailer or internet store sells replacement belts.
  • Check the motor coupling: You can either operate the machine without a load or manually check the motor connection to see if the drive belt needs to be replaced. You’ll need to purchase a new one if it breaks.
  • Check the lid switch: Opening the machine’s lid is a great way to check if the lid switch is pressed when the lid is closed. If it isn’t, a simple switch shift will solve the problem.
  • Check the drain pump: The machine’s front panel should be opened to check the drain pump for damage or obstruction. If it breaks or becomes clogged, it needs to be replaced. 
  • Check the motor control board: A control board test for the motor. Check the supply voltage to the engine or look for physical signs of damage on the control board. The damaged board has to be replaced.
  • Check the transmission: By removing the machine’s rear panel, examine the transmission for signs of damage. If it is damaged or behaving poorly, get a new one.
  • Balance the load: The load should be distributed more equally if the machine is cumbersome or the burden is unequal. Some clothing may need to be removed.

Before performing any repairs, remember to switch off the electrical. Professional assistance should be sought if you are uncomfortable identifying and resolving the issue independently.

Preventive measures to keep your Washing Machine Not Spinning:

Take preventative action now that you know the symptoms and the solution when your washing machine stops spinning. Here are some washing machine maintenance suggestions:

  • Don’t overload the machine: Run the machine at a reasonable speed to avoid overworking the motor. Pay special attention to the load capacity recommendations from the manufacturer.
  • Balance the load: Severe vibration brought on by an uneven load may damage the motor and transmission. To prevent the drum from breaking, distribute the weight across it.
  • Clean the machine regularly: When dirt and debris are not regularly removed from a machine, blockages can form inside the device and harm the pump and other components. Regular maintenance should be performed on the machine, including cleaning the lint and pump filters.
  • Use the right detergent: Be careful not to damage the pump or other components by allowing suds to build up due to using too much or the wrong detergent. Speak with the manufacturer for advice on the suitable detergent and how much to use.
  • Use the right water temperature: Use cold or room-temperature water. Using hot or cold water may result in machine damage and unreliability. Always refer to the care label or manufacturer’s instructions for the ideal water temperature for washing the clothes you wish to clean.

Adhering to these recommendations can keep your washing machine in good operating order and avoid the hassle and cost of repairing or replacing it.


A broken or malfunctioning lid switch, a blocked or damaged drain pump, a torn or malfunctioning motor control board, a torn or malfunctioning transmission, an uneven or overloaded load, or any other issues could cause a washer not to spin.

You can resolve the issue and stop it from happening again by being aware of these potential causes, employing the troubleshooting techniques, and taking the preventative measures suggested in this article.

Put safety first, and get professional assistance if you need clarification on your ability to make repairs.

Leave a Comment